Switching Feeding Modes (ADF -> SADF)
0.
You can switch the feeding mode when the ADF is used, from "ADF" to "SADF". The paper feeding mode has 2 types as
follows:
ADF (Continuous feed mode): Feeds originals continuously when you press the [START] button on the control
panel while originals are being placed on the ADF. This is useful when you make more than one copy in one
operation. (Default setting)
SADF (Single feed mode): Feeds originals one by one automatically. This is useful when you usually only have 1
original.
When the single feed mode (SADF) is set, place originals one sheet at a time. If you place more than one original, the
copied image may be skewed or the originals may jam.
Press [ADF -> SADF] on the Edit menu.
1
Press [OK].
2
The feeding mode is now set at "single feed mode".
102 Switching Feeding Modes (ADF -> SADF)