Oki ES9466 MFP Copying Manual page 78

3.HOW TO USE EDITING FUNCTIONS
3 Place the original(s).
When placing them on the original glass, they must be placed from the first page.
Press [Cover Sheet] on the Edit menu.
4
Select the front and back cover settings, and then press [OK].
5
You can select [Both Copied] for the front or back cover sheet only when [1->2 Duplex] or [2->2 Duplex] is set for
the 2-sided copy mode on the basic menu.
Press the [Basic] tab to display the Basic menu. Then select a tray in which normal paper is placed
6
(not the one for the cover sheets).
You must place the normal paper of the same size and direction as that for the cover sheets in advance.
Select other copy modes as required, and then press the [START] button on the control panel.
7
When the originals are placed on the ADF, scanning and copying start.
When they are placed on the original glass, follow steps 8.
Place the next original, and then press [Next Copy] on the touch panel or the [START] button on
8
the control panel.
Scanning of the next original starts. Repeat this procedure until the scanning of all the originals is finished.
78 Applying Different Settings for Cover Sheets (Cover Sheet)