DHW tank
No.
Note
①
Service valve
②
3 way diverting valve
③
Mixing Valve
④
Ciculation Pump
⑤
Drain Valve
⑥
T-Joint
⑦
Tundish
❋ ❋ The table above contains the different components of the functional diagrams .
System configuration
f For the reliable performance and durability, all parts as listed below ,including a relief valve, an expansion vessel, a drain
f
valve and pressure reducing valve, should be installed according to each national or regional standards . They are not
supplied by SAMSUNG .
- Pressure relief valve
- Expansion vessel
- Drain valve
- Tundish
- Expansion relief valve
- Pressure reducing valve
f Screw the thermistor socket in the threaded thermistor hole in the tank, use a thread sealant such as Teflon or similar to
f
make water tight .
f Apply contact glue to the thermistor and insert the thermistor as deep as possible in the thermistor socket . Fix using the
f
nut provided .
No.
⑧
Expansion vessel
⑨
T-Joint
⑩
Expansion relief Valve
⑪
T-Joint
⑫
Pressure reducing valve with integrated check valve and strainer
TW4
Temperature Sensor for Mixing Valve
Tank Temp
Temperature sensor for DHW tank
ENGLISH-48
Note