Advertisement
Unpacking
• A team lift or mechanical aid is required when moving and installing this appliance.
• Keep the heat pump dryer as upright as possible during transportation (ensure it is
not tilted at an angle greater than 45°). If the dryer tips, leave it to stand upright for
at least two hours before switching it on.
•
This product has been packaged to protect it against transportation damage.
Remove all packaging materials from inside and around the appliance.
•
Keep the original packaging carton and materials in a safe place. It will help prevent
any damage if the product needs to be transported in the future, and you can use
it to store the appliance when it is not in use. In the event that the carton is to be
disposed of, please recycle all packaging materials where possible.
•
Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely.
CAUTION:
•
Before using the dryer, you must remove both pieces of packaging foam
from the drum.
1. Open the loading door.
2. Pull off the adhesive strips from inside the machine on top of the drum.
3. Remove the two pieces of packaging foam from the machine.
•
Check all parts of the package against the scope of delivery list on the following
page and ensure you have received all items.
•
Inspect the cord and plug for damage or wear before each use. Do not use the
appliance if the appliance or its cord is damaged or not working properly. In case of
damage, contact our after sales support centre.
•
Read this manual to familiarise yourself with all the parts and operating principles
of the heat pump dryer. Pay particular attention to the safety instructions on the
previous pages.
CAUTION: VERY HEAVY!
After Sales Support
1300 886 649 |
tempo.org/support
7
Advertisement
