Download Print this page

Onix ON-HPD8W User Manual page 18

8 kg heat pump dryer

Advertisement

Instructions (Cont.)
a program
(f) Pausing
To pause the drying process, press the Start/Pause button or open the door while
the program is running.
To restart the program, press the Start/Pause button once again.
Modifying a program
(g)
To change a program which is running, first pause or cancel it using the Start/
Pause button or the ON/OFF button.
Then, select the new program. If you have switched the dryer off, switch it on again
using or the ON/OFF button, before pressing the Start/Pause button to start the
new program.
Cancelling a program
(h)
To cancel a program which is running, press the ON/OFF button.
(i) At the end of the program
If you have selected the Anti-crease function, the dryer will automatically operate
intermittently for 120 minutes after the cycle has ended. This helps prevent the
clothes from wrinkling if you are unable to remove them immediately after the cycle
ends.
If you do not remove the laundry, the dryer will stop automatically at the end of the
anti-crease phase. If there is no activity within 10 minutes, the appliance will enter a
dormant state.
Press the ON/OFF button to switch the machine off before removing the laundry.
If individual items are still damp after drying, run another, shorter cycle (that is
apprpriate for your textiles). Please note that at least 30 minutes post-drying time
will be required to dry the items completely, especially for multilayered parts such
as collars, pockets, etc. Do not over-dry laundry, this avoids creasing and saves
energy.
Unplug the dryer from the power supply.
After every use, clean the filter and empty the water container (see pages 23-24 for
instructions).
Door opening
While you can open the door during operation to add an item you forgot, we
recommend you do NOT open the door until the program has finished to avoid getting
scalded, as parts of the machine may get hot during operation. If the door is opened
during operation, the dryer will automatically stop. To restart it, you must close the door
securely and press the START/PAUSE button.
18
After Sales Support
1300 886 649 |
tempo.org/support

Advertisement

loading