Advertisement
Instructions (Cont.)
Trial run
In order to remove any dust and grease, which may be in the drum from the
manufacture and transportation processes, we recommend you run the dryer with
some clean, damp rags before using it for the first time with your laundry.
Make sure the dryer is properly installed, plugged in and power is supplied.
Put some clean, damp rags into the drum.
Press the ON/OFF button.
Turn the Program dial to the "Quick Dry" program.
Press the Start/Pause button and let the program run to the end.
Remove the rags and clean the lint filter (see page 23).
Step-by-step guide to using the dryer
(a) Loading
Open the door and load the dryer following the guidelines on page 13. The total
weight of the load to be dried depends on the program chosen. All maximum load
values are listed in Table 1 on page 15.
Close the door and ensure that no items are caught in the door.
Switching the dryer on
(b)
Press the ON/OFF button to turn the heat pump dryer on.
Selecting a program
(c)
Turn the Program dial to select the desired drying program. If you do not press any
buttons within the next 10 minutes, the program selection will switch off.
Selecting a program option
(d)
Depending on the program, you can add one of the speciality functions to
customise your drying program.
To select a program option, press the relevant option button (Dry Level, Anti-
Crease) after choosing the desired program and depressing the Start/Pause
button.
ing a program
(e) Start
Press the Start/Pause button to commence drying. The drum will start rotating.
You can activate the child lock function now by holding down the Dry Level and
Anti-Crease buttons for three seconds.
After Sales Support
1300 886 649 |
tempo.org/support
17
Advertisement
