Table of Contents
Advertisement
Example: Waking up to the music of a compact disc
Press the receiver's POWER
ON/STANDBY button ta
turn the power on.
POWER
ON/STANDBY
OPEN/CLOSE
Press the CD player's
OPEN/CLOSE button to
open the disc tray.
[8]
Load the CD in the disc
tray.
Refer to Page 13.
OPEN/CLOSE
Press the CD player's
OPEN/CLOSE button again
to close the disc tray.
Press the receiver's TIMER
buttons.
TUNING
Use the receiver's UP and
DOWN
uP
DOWN buttons to display
"Cb*.
Foliow steps 6 to 16 under "Setting the Timer" on Page 20.
Operations marked [R] can also be performed using the remote controi unit.
Example:
Waking
up to the music of a cassette
tape
Press the receiver's POWER
ON/STANDBY button to
POWER
turn the power on.
oy
Press the cassette deck's
.
OPEN/CLOSE button to
fy
open the tray.
@& OPEN/CLOSE
fa]
Load the cassette tape
in the tray.
Refer to Page 17.
Press the cassette deck's
OPEN/CLOSE button again
=
to close the tray.
& OPEN/CLOSE
a]
Press the receiver's TIMER
buttons.
Use the receiver's UP and
DOWN buttons to display
"TAPE".
Follow steps 6 to 16 under "Setting the Timer" on Page 20.
The tape will be played in the direction indicated by the tape direction indicators.
Check that the tape direction and reverse mode settings are as desired.
(Refer to "Using the Auto Reverse Function" on Page 18.)
@ When using the timer, the tape is played in direction indicated for Deck 2.
Operations marked [R]can also be performed using the remote control unit.
21
Advertisement
Table of Contents
