PAIRInG THE BLUETOOTH SYSTEM WITH OTHER BLUETOOTH DEVICES 3.1 Phone Pairing 3.1.1 Pairing When the Momentum EVO is Turned Off 3.1.2 Pairing When the Momentum EVO is Turned On 3.2 Additional Mobile Phone, GPS, MP3 Players or Sena SR10 Two-way Radio Adapter...
Page 3
TABLE OF CONTENTS CONTINUED 3.3 Advanced Selective Pairing: Hands-Free or A2DP Stereo 3.3.1 Phone Selective Pairing — Hands-Free Profile 3.3.2 Media Selective Pairing — A2DP Profile 3.4 GPS Pairing MOBILE PHOnE USAGE 4.1 Making and Answering Calls 4.2 Speed Dialing 4.2.1 Assigning Speed Dial Presets 4.2.2 Using Speed Dial Presets STEREO MUSIC...
Page 4
TABLE OF CONTENTS CONTINUED 7.2 Two-Way Intercom 7.3 Multi-Way Intercom 7.3.1 Starting a Three-Way Intercom Conference 7.3.2 Starting a Four-Way Intercom Conference 7.3.3 Ending Multi-Way Intercom 7.4 Three-Way Conference Phone Call with Intercom Users 7.5 Group Intercom 7.6 Mesh Intercom Conference with Bluetooth Intercom Participant 7.7 Universal Intercom USInG THE FM RADIO...
No helmet can protect the wearer against all possible impact scenarios. For maximum protection, the Momentum EVO Helmet must fit properly on the head and its retention strap securely fastened under the chin. With the retention system comfortably but firmly adjusted, the helmet should allow sufficient peripheral vision when secured.
1 ABOUT THE MOMENTUM EVO BLUETOOTH HELMET WITH MESH INTERCOM™ 1.2 Product Details Outer Shell Head Ventilation Chin Ventilation Bluetooth Face Shield System’s Buttons Mesh Intercom Button DC Power Charging & Firmware Upgrade Port MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 7...
1 ABOUT THE MOMENTUM EVO BLUETOOTH HELMET WITH MESH INTERCOM™ 1.3 Package Contents Momentum EVO Helmet Helmet Pouch Helmet Stand USB Power & Data Cable Pinlock WiFi Sync Cable ® 1.4 Ventilation 1.4.1 How to Wear The Helmet Head Ventilation:...
1 ABOUT THE MOMENTUM EVO BLUETOOTH HELMET WITH MESH INTERCOM™ 1.5 Face Shield The face shield is coated with an anti-scratch treatment. Removing and installing the shield is quick and easy: Removal 1. Lift the shield upward so that it is in the most open position.
1 ABOUT THE MOMENTUM EVO BLUETOOTH HELMET WITH MESH INTERCOM™ 1.6 Wearing the Helmet 1.6.1 Putting on the Helmet 1. Unfasten the chinstrap. 2. Gently pull the chinstrap outward and slide the helmet onto your head. 3. Route the chinstrap under your chin, then thread it through both D-Rings.
1 ABOUT THE MOMENTUM EVO BLUETOOTH HELMET WITH MESH INTERCOM™ 1.7 Pre-Ride Helmet Inspection 1.7.1 Checking the Exterior Check the helmet regularly for damage. Small, superficial scratches will not impair the helmet’s protective qualities. In the case of more serious damage (cracks, dents, flaking and cracking paint, etc.), the helmet...
2.2 Downloadable Sena Software 2.2.1 Momentum EVO Utility App By simply pairing your phone with your Bluetooth system, you can use the Momentum EVO Utility App for quicker and easier set up and management. • App Features – Mesh Intercom, Bluetooth Intercom, Music, FM Radio, Device settings, Quick Start Guide, and User’s Guide.
• Please make sure to take off your helmet while charging. The Bluetooth system automatically turns off during charging. • Any 3rd party USB charger can be used with Sena products if the charger is approved by either the FCC, CE, IC or other locally approved agencies that Sena accepts.
2.6 Volume Adjustment Volume is set and maintained independently at different levels for each audio source (i.e. phone, intercom), even when the Bluetooth system is rebooted. Volume up Volume down MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 14 ®...
3. Pairing the Bluetooth SyStem with other Bluetooth DeviceS The pairing operation is required only once for each Bluetooth device. The Bluetooth system can also be paired with up to three other Sena headsets. Pairs with up to three Sena...
1. Execute Second Mobile Phone Pairing in the Bluetooth System Configuration Menu. HOLD 2. With your mobile phone in Bluetooth-pairing mode, select Momentum EVO in the list of devices detected. 3. If your mobile phone asks for a PIN, enter 0000. 3.3 Advanced Selective Pairing: Hands-Free or A2DP Stereo Phone Pairing allows the Bluetooth system to establish two Bluetooth profiles: Hands-Free or A2DP Stereo.
1. Execute GPS Pairing in the Bluetooth System Configuration Menu. HOLD 2. With your Bluetooth device on the GPS navigation screen, select Momentum EVO in the list of devices detected. 3. If your Bluetooth device asks for a PIN, enter 0000. MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™...
4.2 Speed Dialing 4.2.1 Assigning Speed Dial Presets Speed Dial Presets could be assigned in the settings menu, accessible through Sena Device Manager or Momentum EVO Utility App. 4.2.2 Using Speed Dial Presets Enter Speed Dial Mode Navigate through Speed Dial...
Bluetooth system connected during Mesh Intercom and will share music with the first participant that accepts the request. Bluetooth Intercom Music Sharing HOLD “Music sharing on” MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 19 ®...
Page 20
5 STEREO MUSIC Mesh Intercom Music Sharing [Creator] [Participant] HOLD “Would you like to accept music sharing?” “Music sharing on” HOLD MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 20 ®...
6. MESH INTERCOM 6.1 What is Mesh Intercom? Mesh Intercom™ is a dynamic communication system created by Sena that provides instant and effortless bike-to-bike communication without a pre-grouping process. Mesh Intercom allows riders to connect and communicate with nearby users without the need to pair each Bluetooth system together.
(1-9) to use through the Bluetooth system. It can connect with a virtually unlimited number of users in each channel. Channel 1 Channel 2 Channel 9 MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 22 ®...
Group Mesh 6.2 Starting Mesh Intercom When Mesh Intercom is enabled, the Momentum EVO will automatically connect to nearby Momentum EVO users and allow them to talk to each other by pressing the Mesh Intercom Button. Mesh Intercom On Mesh Intercom Off “Mesh intercom on”...
6 MESH INTERCOM 6.3 Using the Mesh in Open Mesh When Mesh Intercom is enabled, the Momentum EVO will be in Open Mesh (default: channel 1) initially. 6.3.1 Channel Setting (Default: channel 1) If the Open Mesh communication experiences interference because other groups are also using channel 1 (default), change the channel.
6.4.1 Creating a Group Mesh Creating a Group Mesh requires two or more Open Mesh users. Open Mesh 1. Enter into Mesh Grouping to create a Group Mesh. HOLD FRIEND “Mesh Grouping” MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 25 ®...
One of the members in an Existing Group Mesh can allow new members in Open Mesh to join the Existing Group Mesh. Existing Group Mesh New Members and Current Members MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 26 ®...
Page 27
Note: If the Mesh Grouping is not completed within 30 seconds, the current members will hear a low tone double beep and the new member will hear a voice prompt, “Grouping failed”. MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 27 ®...
Open Mesh and Group Mesh. You will hear a voice prompt, “No Group Available”. 6.7 Enable/Disable Mic (Default: Enable) Users can enable/disable the microphone when communicating in a Mesh Intercom. Enable/Disable the Microphone HOLD MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 28 ®...
Center Button, or the second Intercom friend (C) may join the intercom by making an intercom call to you (A). Intercom Intercom Intercom Intercom Intercom Intercom Friend B Friend C Friend B Friend C Friend B Friend C MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 30 ®...
Intercom Friend to the mobile phone conversation. Invite an Intercom Friend into Phone Conference Disconnect the intercom during a conference phone call Disconnect the mobile phone call during a conference phone call HOLD MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 31 ®...
In this case, it is recommended to communicate with other Sena headsets via Bluetooth intercom connection and use Mesh Intercom between Momentum EVO helmets. A user who is in Open Mesh or Group Mesh when using Mesh Intercom is able to include up to 3 of their Bluetooth intercom friends.
Page 33
7 INTERCOM SETUP Note: • The audio quality will be reduced if a Momentum EVO connects to 2 or more Bluetooth intercom friends while in Open Mesh or Group Mesh when using Mesh Intercom. • If a closed loop is created, as shown below, each user will experience severe noise issues.
Universal Intercom allows you to have intercom conversations with users of non-Sena Bluetooth headsets. You can pair the Bluetooth system with only one non-Sena headset at a time. The intercom distance depends on the performance of the Bluetooth headset to which it’s connected.
1. Enter preset selection mode. HOLD 2. Navigate forward or backward through preset stations that you want to store. 3. Save station to the preset number or delete station from memory. HOLD HOLD MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 35 ®...
HOLD HOLD Save the Current Station The Sena tuner pauses at each station it finds for 8 seconds before moving to the next. Note: You can use the Sena Device Manager or the Momentum EVO Utility App to save the preset stations.
Check battery “Check battery” Standby / Music / Speed dialing “Speed dial [one, two, three]” FM Radio Redial the last call “Redial” Check connected devices “Connected devices” Configuration menus “Configuration” MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 37 ®...
Page 38
• To activate the voice command during intercom conversation, tap the Center Button and (-) Button at the same time. MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 38 ®...
10.2 Firmware Upgrades The Bluetooth system supports firmware upgrades. You can upgrade the firmware using the Sena Device Manager. Please visit sena.com to check for the latest software downloads. Click Here to Visit sena.com MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™...
Remote Control device in pairing mode. 11.2 Software Configuration Setting You can change the settings of the Bluetooth system through the Sena Device Manager or the Momentum EVO Utility App. 11.2.1 Speed Dial Assign phone numbers for speed dialing to make a phone call quickly.
• The intercom distance of HD Intercom is relatively shorter than that of normal intercom. • HD Intercom will become disabled temporarily when Bluetooth Intercom Audio Multitasking is enabled. MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 42 ®...
The music, FM radio and GPS overlaid audio reduces in volume whenever there is an ongoing intercom conversation. If Audio Overlay Volume Management is enabled, the volume level of the overlaid audio will not be reduced during intercom conversation. MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 43 ®...
When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is disabled, the background noise is mixed with your voice during intercom. MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 44 ®...
Note: Fault Reset will not restore the Bluetooth system to factory default settings. 12.2 Factory Reset To erase all of your settings and start fresh, the system can be restored to factory default settings using the factory reset. HOLD MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 45 ®...
Store the helmet in a dry, dark, well-ventilated location, out of the reach of children and animals. Always position the helmet so that it cannot fall to the floor. Damage that occurs in this way is not covered by the warranty. MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 46 ®...
Page 47
Hero3 and Hero4 allowing for Bluetooth ® capabilities. The Bluetooth word mark and logos are owned by the ® Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone and iPod touch are registered ® ®...