Wearing The Helmet; How To Fit The Helmet - Sena RUMBA User Manual

1 ABOUT THE RUMBA BLUETOOTH

1.4 Wearing the Helmet

1.4.1 How to Fit the Helmet

For proper use, the helmet must sit level on the head and low on
the forehead. The helmet uses a simple, quick-release buckle system
that, once adjusted, can be buckled and unbuckled without changing
the tightness. For proper use, the straps must be tight and evenly
tensioned.
To properly wear your helmet:
1. Position the helmet on your head with the front covering your
forehead. If the helmet is tipped back too far and is not covering your
forehead then the helmet is not in the proper position.
2. Position the strap adjuster centered, just below your ears.
WARNING: Always wear the helmet in the proper position on
your head with the front of the helmet covering your forehead for
maximum protection. Never wear the helmet tipped back as the
helmet will be in the improper position causing your forehead to be
exposed. All fitment adjustments need to be made with the helmet
in the proper position.
3. Position the helmet halfway down on your forehead with the buckle
under your chin and back against your throat. The straps should fit
comfortably around both of your ears.
MULTI-SPORT HELMET
®
RUMBA Bluetooth Multi-sport Helmet | 6