Poly VVX 310 Configuration

1. Logging In

•
Go to: http://portal.popp.com/bg
•
Number: enter 10-digit phone number (phone number must be set up by POPP with
administrative access) or e-mail (if e-mail login is enabled)
•
Password: enter the password and click [Login]

2. Individual Telephone Configuration

1. Click [Phones]
2. Check the box next to the phone to be
configured
3. Click on [Actions] and select [Configure phone]
4. Click [Edit]
5. Click [Programmable Keys – Line] (or click on the line keys
on the telephone) to configure a line key button:
A list of keys ("Key 1", "Key 2", etc.) will appear
o
below. The key numbers listed correspond to the line
key buttons on the telephone as follows:
Poly VVX 150:
Key 1
Key 2
© POPP.com, Inc. All rights reserved.
Poly Telephone Configuration in Administrator Portal
POPP Hosted Microsoft VoIP Phone System
telephone display
For service, call 763-797-7900 or visit www.popp.com Page 1 of 4 5/27/22