Kits Available On Request - Immergas VICTRIX EXA 24 X 1 ERP Instruction Booklet And Warning

1.28 KITS AVAILABLE ON REQUEST.

• System shut-off valve kits with or without inspection filter
(on request). The boiler is designed for installation of system
interception cocks to be placed on flow and return pipes of the
connection assembly. This kit is very useful for maintenance
because it allows to empty just the boiler without having to
empty the entire system. Moreover, the version with filter pre-
serves the functioning characteristics of the boiler thanks to its
inspectionable filter.
• System zone control unit kit (on request). If the heating system
is to be divided into several zones (max. three), in order to in-
terlock them with separate adjustments and to keep water flow
rate high for each zone, Immergas supplies zone system kits by
request.
• Polyphosphate dispenser kit (on request). The polyphosphate
dispenser reduces the formation of lime-scale and preserves the
original heat exchange and domestic hot water production condi-
tions. The boiler is prepared for application of the polyphosphate
dispenser kit.
36
• Relay board (on request). The boiler is prepared for the instal-
lation of a relay card that allows to increase the features of the
appliance and therefore functioning possibilities.
• Cover kit (on request). If installed outdoors in a partially pro-
tected place with direct air intake,it is compulsory to mount the
appropriate top protection cover for the correct functioning of
the boiler and to protect it from adverse weather conditions.
• Column attachment kit UB 200 (upon request). A vertical
connection kit is envisioned for the connection of the 200 litre
storage tank unit (when the boiler is connected to an external
storage tank unit), which enables you to connect the storage tank
unit directly to the boiler without having to insert the connection
pipes into the wall.
The above-mentioned kits are supplied complete with instructions
for assembly and use.