Charging; Operation; Preparation - Silk'n FACETITE MULTIPLATFORM User Manual

6

Charging

EN
NOTICE! RISK OF DAMAGE!
• Do not charge the product on or in proximity to any potentially
flammable materials (e.g., mattress, blanket and wood) or near any
liquids.
• Fully charge the product before first use and when the battery power is low.
• When the battery power is low, the battery/attachment indicator light flashes
orange during use. Recharge the product.
• If the product is to be stored for an extended period, the battery level should
be checked and the product should be charged regularly.
• The product can also be used with the power adapter connected to the mains
socket.
1. Plug the connector
product.
2. Install a suitable power plug
For installation, place the power plug onto the power adapter and then rotate the
power plug towards the lock icon ( ) until it locks into place.
For removal, press and hold the release button
towards the unlock icon ( ) until it comes off from the power adapter.
3. Connect the power adapter to a mains socket.
Charging starts automatically. The battery/attachment indicator light
during charging and illuminates green when charging is done.
4. When charging is done, disconnect the power adapter from the mains socket and
remove the connector from the charging port of the product.
7

Operation

• Clean all parts of the product before first use as described in the chapter
"Cleaning".
• Read the chapter "Tips on using the product" before use.

7.1 Preparation

1. Fully charge the product before use (see chapter "Charging").
You may also use the product with the power adapter
socket.
2. If necessary, attach the RF attachment
platform
1
Use the RF attachment for more efficient use on larger areas (e.g. cheeks, neck).
Use the EMS attachment for stimulation of the muscles through micro-currents.
For installation, gently press the selected attachment onto the RF platform until it
locks into place (see Fig. B). Make sure that the triangular mark on the back of the
attachment is pointing upwards.
For removal, gently pull the attachment outwards until it detaches from the RF
platform.
11
of the power adapter
14
(2 pins/3 pins) onto the power adapter.
11
.
into the charging port
13
and then rotate the power plug
12
connected to the mains
13
or EMS attachment
5
of the
10
flashes orange
8
onto the RF
6