Charging - Silk'n ND-FM02 User Manual

1. Take the product out of the packaging.
EN
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are damaged. If
this is the case, do not use the product. Contact our customer
service.

5 Charging

WARNING! RISK OF INJURY!
• Charge only with the supplied USB cable and
USB wall adapter.
• Only charge the product at temperatures
between 0 and 40 °C.
• Fully charge the product before first use and when the
• When the battery power is low, the indicator lights
• The product cannot be used during charging.
• If the product is to be stored for an extended period,
1. Connect the plug
connector
2. Plug the smaller end of the USB cable
port
11
3. Plug the larger end of the USB cable into the USB port of the
USB wall adapter
You may also connect the USB cable to a compatible USB
power source (5.0 V, 1.0 A, 5.0 W) (e.g. PC, laptop or power-
bank) for charging.
4. Plug the USB wall adapter into a mains socket for charging.
Check the program indicator lights
One indicator light = 25 % charged
Two indicator lights = 50 % charged
11
battery power is low.
on the remote control
switching off automatically. Recharge the product.
the charge level should be checked and the lithium
battery should be charged regularly.
of the face mask
2
of the remote control.
7
of the remote control.
.
6
will flash 10 times before
14
with the
1
into the charging
5
for charging progress:
8