Parker COMPACT Operating Manual
  1. Manuals
  2. Brands
  3. Parker Manuals
  4. Measuring Instruments
  5. Service Master COMPACT
  6. Operating manual

Parker COMPACT Operating Manual

Hide thumbs Also See for COMPACT:
Table of Contents

Advertisement

Quick Links

Download this manual
The Parker Service Master COMPACT
Operating Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the COMPACT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Parker COMPACT

Summary of Contents for Parker COMPACT

  • Page 1 The Parker Service Master COMPACT Operating Manual...
  • Page 2 Translation of the original version The information contained in this document may be neither distributed nor copied in whole or in part without express consent from Parker Hannifin Corporation. All brand names and trademarks mentioned in this document, including those protected by third-parties, are subject, unconditionally, to the provisions of the applicable trade- mark legislation and property rights of the registered legitimate owner.

  • Page 3: Table Of Contents

    Mounting Device on VESA Holder ............26 Operation ..................... 27 Basic Principles of Operation ..............27 Display Layout ..................30 6.2.1 Buttons ....................31 6.2.2 Status Bar .................... 32 6.2.3 Top-Down Menu ................... 33 6.2.4 Display Keyboards ................34 The Parker Service Master COMPACT V1.0/02/24...
  • Page 4 7.5.1 Setting VADC Channels ................ 72 CALC-Channels ..................73 7.6.1 Setting Calculation Channels ..............74 Device Settings ..................75 7.7.1 Setting Display (Display/Energy) ............76 7.7.2 Units ..................... 77 7.7.3 Changing Language ................78 The Parker Service Master COMPACT V1.0/02/24...
  • Page 5 12.5.2 Analog (SCM-370-0-02 only) ..............95 12.5.3 AUX ...................... 95 12.5.4 Calculation Channels ................95 Appendix ...................... 96 13.1 Kits ......................96 13.2 Spare Parts and Accessories ..............97 13.3 Technical Standards ................. 97 The Parker Service Master COMPACT V1.0/02/24...
  • Page 6 13.4 Rating Plate ..................... 98 13.5 Certificates ....................98 13.6 Customer Service ..................98 13.7 Manufacturer ................... 98 13.8 Dimensional Drawings ................99 13.9 Declaration of Conformity ............... 100 The Parker Service Master COMPACT V1.0/02/24...
  • Page 7 About this Operating Manual This Operating Manual is a component part of The Parker Service Master COMPACT and contains important information on the intended use, safety, operation and maintenance of the device described. Subject to change without prior notice. ► Before each step, read the corresponding information carefully and adhere to the sequence of steps described.

  • Page 8: Notation And Symbols

    Probability of occurrence: very high. WARNING Risk of fatal or severe personal injury. Probability of occurrence: possible. CAUTION Risk of minor to moderate personal injury. Probability of occurrence: possible. IMPORTANT Risk of property damage. Probability of occurrence: possible. The Parker Service Master COMPACT V1.0/02/24...

  • Page 9: Structure Of Warnings

    Type and source of the risk Consequences of failure to observe the warning ► Measures to avoid the risk IMPORTANT Type and source of the risk Consequences of failure to observe the warning ► Measures to avoid the risk The Parker Service Master COMPACT V1.0/02/24...

  • Page 10: Product Description

    Alternatively, the main functions can be selected via the six hardware keys on the device. The USB-C port is used to connect the Parker Service Master COMPACT to a PC and thus enables measured value evaluation to be completed. In addition, the USB-C port is also used to charge the device.

  • Page 11: Intended Use

    Product Description Intended Use The Parker Service Master COMPACT, subsequently referred to as "device", enables access to sensors used in hydraulic applications in machines and vehicles. The various connections can be used to detect, save, monitor and evaluate digital or analog sensor signals for pressure, temperature, volume flow, speed, volumes and performance, for example.

  • Page 12: Conformity

    Check the parts included in the supply package prior to starting up the device. If anything is missing, please contact your sales outlet. ■ The Parker Service Master COMPACT ■ USB stick ■ USB cable (type A on type C) ■...

  • Page 13: Safety Information

    ► Never attempt to repair the device yourself. The device may only be re- paired by Parker Hannifin. ► Never clean the device with substances containing solvents. The device may only be cleaned in the way described in Section Cleaning. The Parker Service Master COMPACT V1.0/02/24...

  • Page 14: Technical Personnel

    Technical personnel must have read and understood the operating manual. Technical personnel must have access to the content of the operating manual at all times. The Parker Service Master COMPACT V1.0/02/24...

  • Page 15: Design And Function

    Some illustrations and descriptions may refer to additional options that are not part of a standard configuration of the device. Some of the components, functional processes or options described may be at a development stage that differs from the device actually delivered. The Parker Service Master COMPACT V1.0/02/24...

  • Page 16: Overview

    Design and Function Overview Fig. 2 Overview of The Service Master COMPACT Pos. Designation Inputs, depending on the model version 1 × USB-A, 1 × USB-C On/Off key Status LED Context-sensitive function keys Display (touchscreen) Stylus (on the underside, optional) Shock protection...

  • Page 17: Functions And Features

    ■ For recording, saving and analyzing measured data ■ Various measuring methods and their representation ■ Fold-out stand ■ VESA standard for wall installation ■ Stylus, optional ■ USB flash drive to save measurements, templates, screenshots The Parker Service Master COMPACT V1.0/02/24...

  • Page 18: Connections

    Connections, CAN model version Pos. Designation Description CAN Bus To connect CAN bus sensors USB-C connection For connection to the power supply adapter or to a PC USB-A connector To connect the USB memory stick The Parker Service Master COMPACT V1.0/02/24...
  • Page 19 Fig. 4 Connections, CAN + AUX model version Pos. Designation Description CAN Bus To connect Parker CAN bus sensors with auto- matic sensor detection AUX connection To connect analog external sensors USB-C connection For connection to the power supply adapter or...

  • Page 20: Aux

    After connecting the sensors without sensor detection, complete the neces- sary settings for the electrical connection and expected signal according to the properties of the sensors connected. The Parker Service Master COMPACT V1.0/02/24...

  • Page 21: Starting Up

    ► If the charge status of the battery drops below a specific value, the mea- surement in progress is stopped. The measured values and user param- eters are saved. The device switches off automatically. The Parker Service Master COMPACT V1.0/02/24...

  • Page 22: Switching The Device On And Off

    2 Tap on the button. Ä The device is switched off. Alternatively: 1 When switched on, press and hold the On/Off button for at least 5 sec- onds. Ä The device is switched off. The Parker Service Master COMPACT V1.0/02/24...

  • Page 23: Connecting Sensors

    Restart the measurements in order to record data from sensors just connect- ed. Measuring data from sensors which are disconnected while a measure- ment is in progress is recorded by the device to the moment of disconnection. The Parker Service Master COMPACT V1.0/02/24...

  • Page 24: Connecting Analog Sensors

    Restart the measurements in order to record data from sensors just connect- ed. Measuring data from sensors which are disconnected while a measure- ment is in progress is recorded by the device to the moment of disconnection. The Parker Service Master COMPACT V1.0/02/24...

  • Page 25: Using The Fold-Out Stand

    Only use the stand to set up the device on a level surface. max. 90° Fig. 10 Using fold-out stand 1 Pull the fold-out stand on the rear side of the device to the required posi- tion. 2 Set the device down on a level surface. The Parker Service Master COMPACT V1.0/02/24...

  • Page 26: Mounting Device On Vesa Holder

    3 Screw the device using four retaining screws and an appropriate tool. Ä The device is mounted. INFORMATION The maximum screw-in depth for the retaining screws is 6 mm. The VESA holder and screws necessary for assembly (M4 metric) are included in the supply package. The Parker Service Master COMPACT V1.0/02/24...

  • Page 27: Operation

    The device is mainly operated by using the buttons provided on the touch- screen. You can use your fingers or an appropriate stylus. Alternatively, you can start the main functions using the context-sensitive function keys provided on the device. The Parker Service Master COMPACT V1.0/02/24...
  • Page 28 Draw two fingers towards each other on an element or view to zoom out. This function is not available for all views. INFORMATION It is also possible to use the touchscreen when wearing gloves appropriate for the purpose. The Parker Service Master COMPACT V1.0/02/24...
  • Page 29 Press the key for 5 sec.: Switch on/off Function key to start and stop measurements 3 context-sensitive function keys to initiate functions according to the corresponding buttons in the menu area of the touch- screen The Parker Service Master COMPACT V1.0/02/24...

  • Page 30: Display Layout

    Measuring methods menu Selects Measuring methods area Button, Start/Stop To start/stop measurements Menu Area To initiate the main functions Options/Info button Measurement inactive: Display/hide Op- tions menu Measurement active: Displays sensor infor- mation The Parker Service Master COMPACT V1.0/02/24...

  • Page 31: Buttons

    Layout“ on Page 30. A display keyboard for entering numbers and letters appears when you tap an input field. ► Further information on the display keyboard available is provided in Chapter & „Display Keyboards“ on Page 34. The Parker Service Master COMPACT V1.0/02/24...

  • Page 32: Status Bar

    The table below indicates the possible symbols: Symbol Function Connecting a storage medium to the USB port Number of active channels Battery charge status as an icon Ongoing online measurement via SensoWin The Parker Service Master COMPACT V1.0/02/24...

  • Page 33: Top-Down Menu

    Adjust display brightness in 5 steps Adjust display filter in 4 steps Switches the device on/off automatically INFORMATION Drag your finger on the top-down menu from bottom to top to close the top- down menu. The Parker Service Master COMPACT V1.0/02/24...

  • Page 34: Display Keyboards

    The following keyboard is available to enter texts and digits: Fig. 16 Display keyboard, characters and numbers INFORMATION The layout of the keyboard can be set. ► Refer to Chapter & „Selecting Keyboard“ on Page 80. The Parker Service Master COMPACT V1.0/02/24...
  • Page 35 Operation The following keyboard is available for entering numerical values: Fig. 17 Display keyboard, numerical values The Parker Service Master COMPACT V1.0/02/24...

  • Page 36: Menu Area

    Display information on the current measurement Add an entry Edit a setting Confirm current selection or adjusted settings Discard current selection or adjusted settings Switching the Device Off Deactivate touch function Switch off back-lit display The Parker Service Master COMPACT V1.0/02/24...

  • Page 37: Measurement Views

    Changing the measurement view 1 Swipe from right to left across the display. Ä The next measurement view appears. It is possible to switch between the individual measurement views while a mea- surement is in progress. The Parker Service Master COMPACT V1.0/02/24...

  • Page 38: 4-Tile View

    Shows the maximum and minimum measured values and the measur- ing range full scale value (FS) Edit the details of the individual channels if necessary: 1 Tap on a channel to open the channel editing function (Edit channels). The Parker Service Master COMPACT V1.0/02/24...

  • Page 39: 9-Tile View

    Designation and name of the active channel as an abbreviation Current measured value of the channel Edit the details of the individual channels if necessary: 1 Tap on a channel to open the channel editing function (Edit channels). The Parker Service Master COMPACT V1.0/02/24...

  • Page 40: Trend Graph View

    Refer to Chapter & „Analyzing the Measurements“ on Page 61. Fig. 21 Trend graph view Pos. Description Name of the channel Selected channel (increased line thickness) Current measured value of the channel Trend graph line of the selected channel The Parker Service Master COMPACT V1.0/02/24...

  • Page 41: Options: Edit Channels In The Measurement View (Edit Channels)

    Ä The button is shown. Fig. 22 Options menu 2 Tap on the button. 3 Tap on the Edit channels button. Ä The window for editing the channels opens. The Parker Service Master COMPACT V1.0/02/24...
  • Page 42 Edit the colors of the channels Enter/Edit the names of the channels Edit the list positions of the channels (by entering the position or with manual movement) Activate/Deactivate channels (measured values of deactivated channels are not saved) The Parker Service Master COMPACT V1.0/02/24...

  • Page 43: Options: Save Template

    Ä The button is shown. Fig. 24 Context-related options menu 2 Tap on the button. 3 Tap on the Save template button. Ä The window for saving the measurement view as a template is displayed. The Parker Service Master COMPACT V1.0/02/24...
  • Page 44 Save measurement view as template (Save Template) Pos. Description Enter name of template Enter description of template Cancel operation Save template ► To load an existing measurement template, refer to Chapter & „Loading Measuring Templates“ on Page 64. The Parker Service Master COMPACT V1.0/02/24...

  • Page 45: Options: Reset Values Of The Measurement View (Reset)

    1 Tap the Stop button to stop the current measurement. Ä The button is shown. Fig. 26 Context-related options menu 2 Tap on the button. 3 Tap on the Reset button. Ä Another menu with options is displayed. The Parker Service Master COMPACT V1.0/02/24...
  • Page 46 Reset minimum and maximum values of all channels CH. to 0 Reset the channel offset to zero (to max. 2% FS) Delta to 0 Reset delta to zero (when the corresponding calcula- tion channel is activated) The Parker Service Master COMPACT V1.0/02/24...

  • Page 47: Options: Display Information On Sensors (Info)

    Ä The button is shown. Fig. 28 Context-related options menu 2 Tap on the button. 3 Tap on the Info button. Ä Information on the sensors of the current measurement is displayed. The Parker Service Master COMPACT V1.0/02/24...
  • Page 48 The following information is only displayed for CAN sensors: ■ Product ID ■ Revision number ■ Serial number ■ Baud rate ■ SW version ■ Hardware version ■ Vendor ID ■ Message ID ■ Note ID ■ PTS ID The Parker Service Master COMPACT V1.0/02/24...

  • Page 49: Measurement Status

    The current running time of the measurement is displayed in the info line. 2 Tap on the Stop button. Ä The measurement is stopped. The Parker Service Master COMPACT V1.0/02/24...

  • Page 50: Measuring Methods

    The button shows the currently selected measurement method. 2 Tap on the desired measurement method (Start/Stop, Datalogger). Ä The selected measurement method is used. INFORMATION If the Datalogger measurement method is selected, the settings are dis- played. The Parker Service Master COMPACT V1.0/02/24...

  • Page 51: Start/Stop

    The Min and Max values are not lost but are saved, even in the case of long- term measurements. 1 Tap on the Start button to start a measurement. 2 Tap the Stop  button to stop the measurement. 3 Alternatively, the Start/Stop measurement ends automatically after 7 days. The Parker Service Master COMPACT V1.0/02/24...

  • Page 52: Datalogger

    When the Trigger is activated, the measurement only starts when a defined measurement signal threshold is triggered. 3 Tap the Stop  button to stop the measurement. INFORMATION Alternatively, the measurement stops after the defined storage time has elapsed (Storage time). The Parker Service Master COMPACT V1.0/02/24...
  • Page 53 File name Name of the measurement recording *only applies to AUX 1; all other channels continue to be sampled at 1 ms. The Parker Service Master COMPACT V1.0/02/24...
  • Page 54 Trigger-level Specify the measured value that serves as the trigger Trigger-slope Select whether the trigger is triggered on a rising edge (Rising) of the measured value or on a falling edge (Falling) The Parker Service Master COMPACT V1.0/02/24...

  • Page 55: Completing A Measurement

    After the measurement is stopped, the data is saved in the device memory or on a connected USB data carrier. You can access the data via the File Manager in order to carry out evaluations. ► Further information is available in Chapter & „File Manager“ on Page 58 The Parker Service Master COMPACT V1.0/02/24...

  • Page 56: Settings

    Settings Settings This chapter contains information about the menus and setting options for the device and the connected sensors. Menu The Menu can be opened by tapping the button. Fig. 33 Menu The Parker Service Master COMPACT V1.0/02/24...
  • Page 57 ► Refer to Chapter & „CALC-Channels“ on Page 73. Device Settings Set device. ► Refer to Chapter & „Device Settings“ on Page 75. Device Information Information about the device (serial number, firmware version, etc.). ► Refer to Chapter & „Device Information“ on Page 83. The Parker Service Master COMPACT V1.0/02/24...

  • Page 58: File Manager

    The values after the categories indicate the current and available entries. Fig. 34 File Manager The following submenus are available: Designation Description Measurements Recorded measurements (File format *.scco) Templates Saved templates for measurements (File format *.scct) Screenshots Display recordings (File format *.jpg) The Parker Service Master COMPACT V1.0/02/24...

  • Page 59: Delete/Rename Files/Csv Export

    Ä The multiple selection is displayed. Fig. 35 File manager, multiple selection 3 Tap on additional files to select them. Ä The symbol is displayed on the selected files. 4 Tap on the button. Ä The options are displayed. The Parker Service Master COMPACT V1.0/02/24...
  • Page 60 6 Export: Export the data in the CSV format (this option is only available in the Measurements folder (Measurements)). 7 Delete: Confirm the request. 8 Rename: Use the display keyboard to rename the files. The Parker Service Master COMPACT V1.0/02/24...

  • Page 61: Analyzing The Measurements

    2 Tap on the desired measurement. Ä Measurements are displayed 3 Tap on the checkmark. Ä The measurement is displayed. Use the cursor to display the measured values of the channels at the corresponding time. The Parker Service Master COMPACT V1.0/02/24...
  • Page 62 File manager, analyze measurement Pos. Description Name of the channel Selected channel (increased line thickness) Measured value of the channel at the cursor position Trend graph line of the selected channel Cursor Measurement information The Parker Service Master COMPACT V1.0/02/24...
  • Page 63 Further information on analyzing saved measurements is available via the button Fig. 39 Analyze measurement, information INFORMATION The amount of information displayed depends on the measurement method (Start/Stop, Datalogger) and the channels and sensors used in the tem- plate. The Parker Service Master COMPACT V1.0/02/24...

  • Page 64: Loading Measuring Templates

    7.2.3 Loading Measuring Templates Saved templates (Templates) can be selected and loaded in the File man- ager. 1 Tap on the Templates category. Ä All saved measuring templates are displayed. Fig. 40 File manager, Templates The Parker Service Master COMPACT V1.0/02/24...
  • Page 65 (e.g. incorrect physical unit, measuring range exceeded, CAN identity field does not match) Green: The connected sensor matches the loaded sensor (e.g. unit and range match) Gray: A channel is connected that is not saved in the measuring tem- plate The Parker Service Master COMPACT V1.0/02/24...
  • Page 66 Activate the sensor in the Edit Channels menu if necessary, refer to Chapter & „Options: Edit Channels in the Measurement View (Edit Channels)“ on Page 41. The Parker Service Master COMPACT V1.0/02/24...

  • Page 67: Showing Screenshots

    Saved display images (Screenshots) can be shown in the File manager . 1 Tap on the Screenshots category. Ä All saved display images are displayed. Fig. 43 File manager, Screenshots 2 Tap on the desired screenshot. Ä The screenshot is displayed. Fig. 44 Screenshot The Parker Service Master COMPACT V1.0/02/24...

  • Page 68: Measurement Method

    The following functions are available: Designation Description Start/Stop Simple measuring method, no settings. ► Refer to Chapter & „Start/Stop“ on Page 50. Datalogger Measuring method with optional trigger function and other settings. ► Refer to Chapter & „Datalogger“ on Page 52. The Parker Service Master COMPACT V1.0/02/24...

  • Page 69: Aux-Channels

    2 Tap on the channel name to set further parameters in the submenus. INFORMATION If the storage rate 0.1 ms is selected for the Datalogger measuring method, the sampling rate for both AUX channels is 0.1 ms. *not available for model SCM-370-2-05. The Parker Service Master COMPACT V1.0/02/24...

  • Page 70: Setting Aux Channel

    Set the start/end and units of the measurement range: User specific, Pressure (bar), Temperature (°C), Flow (L/min), Rotational speed (1/min), Volume (L), Power (kW) 1 Tap the button to save the settings as a template in a database (AUX Library). The Parker Service Master COMPACT V1.0/02/24...

  • Page 71: Vadc (Voltage-Current-Frequency-Converter) Channels

    VADC-Channels The following functions are available: Designation Description IN-1 ... IN-4 Further settings are possible in the submenus (for SCM-370-0-02) CAN-1 ... CAN-6 Further settings are possible in the submenus (for SCM-370-1-05 and SCM-370-2-05) The Parker Service Master COMPACT V1.0/02/24...

  • Page 72: Setting Vadc Channels

    (0 ... 20 mA, 4 ... 20 mA, 0 ... 48 V, -48 ... 48 V, 0 ... 4 A, -4 ... 4 A, 0 ... 5 kHz) Measurement Range Set the start/end and units of the measurement range to be displayed: User specific, Pressure (bar), Tempera- ture (°C), Flow (L/min), Rotational speed (1/ min), Volume (L), Power (kW) The Parker Service Master COMPACT V1.0/02/24...

  • Page 73: Calc-Channels

    Activate channel, further settings can be carried out in the submenus CALC-2 Activate channel, further settings can be carried out in the submenus 1 Tap on the button to activate the corresponding channel. 2 Tap on the channel designation to set further parameters. The Parker Service Master COMPACT V1.0/02/24...

  • Page 74: Setting Calculation Channels

    Subtraction, Addition, Power 1, Power 2, Volume, Multiply Select the input signal (depending on the formula selected) Select the input signal (depending on the formula selected) Select the input signal (depending on the formula selected) The Parker Service Master COMPACT V1.0/02/24...

  • Page 75: Device Settings

    Units Select measurement units for measured values Language Select user interface language and install additional languages via USB Time/Date Time and date Keyboard Representation of display keyboard (QWERTZ, QWERTY, AZERTY) CSV-Format Select CSV format The Parker Service Master COMPACT V1.0/02/24...

  • Page 76: Setting Display (Display/Energy)

    10 minutes without input. This function is automatically deactivated during an ongoing measurement. INFORMATION The display filter only affects the displayed measured values. Recorded measurements are not affected. The Parker Service Master COMPACT V1.0/02/24...

  • Page 77: Units

    Select unit of measure (°C, °F) Flow Select unit of measure (L/min, G/min) Rotational speed Select unit of measure (1/min, Rpm) Volume Select unit of measure (L, gal) Power Select unit of measure (kw, HP) The Parker Service Master COMPACT V1.0/02/24...

  • Page 78: Changing Language

    USB storage medium. 1 Tap on the desired language. 2 Tap on the button to confirm your selection. Ä The language of the display texts has been changed. The Parker Service Master COMPACT V1.0/02/24...

  • Page 79: Setting Time/Date

    Set time Time format 24 h Switch 24 h time format on/off Date Set date Date format Set date format (DD.MM.YY, MM.DD.YY) Auto-sync PC Synchronize time and date automatically when con- nected to a PC The Parker Service Master COMPACT V1.0/02/24...

  • Page 80: Selecting Keyboard

    The following keyboard layouts are available: ■ QWERTZ ■ QWERTY ■ AZERTY 1 Tap on the desired keyboard layout. 2 Tap on the button to confirm your selection. Ä The keyboard layout has been selected. The Parker Service Master COMPACT V1.0/02/24...

  • Page 81: Selecting Csv Format

    ■ Separated by a comma (Comma) ■ Separated by a dot (Point) 1 Tap on the desired CSV format. 2 Tap on the button to confirm your selection. Ä The CSV format has been selected. The Parker Service Master COMPACT V1.0/02/24...

  • Page 82: Can Database

    The use of the CAN database can be switched on or off via the CAN Database menu item. INFORMATION The CAN database can only be used as a memory when using a USB stick. The Parker Service Master COMPACT V1.0/02/24...

  • Page 83: Device Information

    Date of last calibration FW version Firmware version Hardware version Hardware version FP App Version FP App version FP BTLD-Version FP Build version Battery Battery type USB-Charger Power supply unit LAN IP Address Network address (if available) The Parker Service Master COMPACT V1.0/02/24...

  • Page 84: Troubleshooting

    Risk of material damage through improperly performed repair work. ► Never open the device! ► Never attempt to perform repair work yourself! ► In the event of defects, return the device to the manufacturer! The Parker Service Master COMPACT V1.0/02/24...

  • Page 85: Resetting Device (Reset)

    1 Press the On/Off button and the yellow function button simultaneously for approx. 5 seconds. Ä The device is switched off. 2 Press the On/Off button. Ä The device starts up again. Fig. 60 Reset device (Reset) The Parker Service Master COMPACT V1.0/02/24...

  • Page 86: Updating The Firmware

    3 Press the On/Off button to switch on the device. Ä During start-up, the device searches for a more current firmware version. Ä If there is no firmware update available, a system message appears. Fig. 61 Updating the Firmware The Parker Service Master COMPACT V1.0/02/24...
  • Page 87 4 Tap on the button to start updating the firmware. Ä The firmware on the device is updated. Ä A progress bar indicates the status of the updating process. Fig. 62 Update firmware, progress bar The Parker Service Master COMPACT V1.0/02/24...
  • Page 88 Ä The device may restart several times during the process. Ä When the process has been completed, the corresponding message appears in the display. Fig. 63 Update firmware, system message Ä The latest version of the firmware is now installed on the device. The Parker Service Master COMPACT V1.0/02/24...

  • Page 89: Packaging And Transporting

    ► Contact your sales outlet prior to dispatch. ► Only dispatch the device in packaging which has been appropriately identi- fied on the outside. The Parker Service Master COMPACT V1.0/02/24...

  • Page 90: Cleaning And Maintenance

    Maintenance work is not necessary on the device within the scope of the in- tended use. The device must be recalibrated after a longer time in use. Contact your sales outlet in this case. ► Refer to Chapter & „Customer Service“ on Page 98. The Parker Service Master COMPACT V1.0/02/24...

  • Page 91: Repairing

    Risk of material damage through improperly performed repair work. ► Never open the device! ► Never attempt to perform repair work yourself. ► In the event of defects, return the device to Parker Hannifin! The Parker Service Master COMPACT V1.0/02/24...

  • Page 92: Disposal

    ► Contact your sales outlet prior to dispatch. ► Only dispatch the device in packaging which has been appropriately identi- fied on the outside. The Parker Service Master COMPACT V1.0/02/24...

  • Page 93: Technical Data

    Device SCM-370-0-02 4 inputs for Parker analog sensors 2 inputs for standard industrial sensors SCM-370-1-05 Interface for up to 6 Parker CAN sensors 2 inputs for standard industrial sensors SCM-370-2-05 Interface for up to 6 Parker CAN sensors K-SCM-370-0-02 Analog AUX device version, calibrated with calibration certificate according to ISO...

  • Page 94: Power Supply (Internal)

    2.5 A at 5 V, 1.8 A at 12 V, 1.2 A at 20 V, a USB-C compatible charger with min. 45 W is required for fast charging, alternatively via USB-A/C cable (included) 5 V max. 2 A The Parker Service Master COMPACT V1.0/02/24...

  • Page 95: Inputs

    12.5.1 CAN (SCM-370-1-05 and SCM-370-2-05 only) Designation Properties Plug 5-pin, M12×1, panel connector, terminating resistor permanently installed sensors Max. 6 Parker CAN sensors with sensor detection Scanning rate Up to 4 sensors: 1 ms, 5-6 sensors: 2 ms 12.5.2 Analog (SCM-370-0-02 only) Designation Properties Plug...

  • Page 96: Appendix

    Appendix Appendix This chapter provides information on the device models available, the appropri- ate accessories, technical data and certificates. 13.1 Kits The Parker Service Master COMPACT Kit SCKIT-370-0-02 SCKIT-370-1-05 SCKIT-370-2-05 SCKIT-370-0-PTQ The Parker Service Master COMPACT Kit K-SCKIT-370-0-02 K-SCKIT-370-1-05 K-SCKIT-...

  • Page 97: Spare Parts And Accessories

    Technical Standards Standard EN IEC 61326-1:2021 RoHS EN IEC 63000:2019-05 Environmental Drop test 1 m (EN 60068-2-31:2008) impact test Vibration resis- DIN EN 60068-2-9:2008-10 tance Type of protec- EN 60529:1989 + A1:1999 + A2:2013 tion The Parker Service Master COMPACT V1.0/02/24...

  • Page 98: Rating Plate

    Customer Service In the event of problems with the device, please contact your sales outlet. 13.7 Manufacturer Parker Hannifin Manufacturing Germany GmbH & Co. KG High Pressure Connectors Europe Postfach 14 07 03, 33627 Bielefeld Am Metallwerk 9, 33659 Bielefeld...

  • Page 99: Dimensional Drawings

    Appendix 13.8 Dimensional Drawings 219 mm The Parker Service Master COMPACT V1.0/02/24...

  • Page 100: Declaration Of Conformity

    EU-Konformitätserklärung EC-Declaration of Conformity Dokument-Nr.: 01/2024 Document-No.: Hersteller: SensoControl Manufacturer Anschrift: Parker Hannifin Manufacturing Germany GmbH & Co. KG Adress High Pressure Connectors Europe Am Metallwerk 9 D-33659 Bielefeld, Germany Tel.: +49 521 4048-0 www.parker.com/hpce Produktbezeichnung: HANDMESSGERÄT SERVICE MASTER COMPACT...
  • Page 101 Appendix 13.10 List of Figures Fig. 1 The Parker Service Master COMPACT Fig. 2 Overview of The Service Master COMPACT Fig. 3 Connections, CAN model version Fig. 4 Connections, CAN + AUX model version Fig. 5 Connections, Analog + AUX model version Fig. 6 Connection, AUX Fig. 7...
  • Page 102 Fig. 53 Display (Device/Energy) Fig. 54 Units Fig. 55 Language Fig. 56 Time/Date Fig. 57 Keyboard Fig. 58 CSV-Format Fig. 59 Device Information Fig. 60 Reset device (Reset) Fig. 61 Updating the Firmware Fig. 62 Update firmware, progress bar Fig. 63 Update firmware, system message The Parker Service Master COMPACT V1.0/02/24...
  • Page 104 Operating Manual The Parker Service Master COMPACT Parker Hannifin GmbH & Co. KG High Pressure Connectors Europe Postfach 14 07 03, 33627 Bielefeld Am Metallwerk 9, 33659 Bielefeld Tel.: +49 (0) 521 4048 0 Fax: +49 (0) 521 4048 4280 Email: Ermeto@parker.com...

Table of Contents