Sony STR-DG820 Operating Instructions Manual page 88

Changing the display
You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press tile button, tile disphty
changes cyclically as follows:
All inputs except the FM and AM
band
Index mune of the input* _ Selected input
Sound fiekt currently applied _ Vohnne level
Stream int_
FM and AM band
Preset station name* -_ Frequency -_ Sound
field currently applied -_ Volume level
XM Radio
Channel name _ Channel number
Category name _ Artist name/Feature
Sonffprogram title _ Signal strength
Sound field currently applied _ Volume level
: Index name appears only when you have assigned
one to the input or preset station (page 67, 87).
Index imme does not appear when only blank
spaces have been entered, or it is the same as the
input name.
Note
Character or marks may not be displayed for some
languages.
Usingthe SleepTimer
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
"SLEEP" lights up in the display.
Each time you press the bntton, the display
changes cyclically as follows:
OFF---+ 0:30:00 _ 1:00:00 _ 1:30:00
2:00:00
Tip
To check the remaining time belk_re the receiver
turns off, press SLEEP. The renmining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
88 us