Sony STR-DG820 Operating Instructions Manual page 20

Notes
• Be sure to turn on tile receiver when tile video and
audio signals of a playback component are being
output to a TV via the receiver. Unless tile power is
turned on. neither vide() nor audio signals will be
transmitted.
• Connect image display components such as a TV
monitor or a proiector to the HDMI OUT or
MONITOR OUT jack on tile receiver. You may
not be able to record, even if you connect recording
components.
• Depending on tile status of tile connection between
the TV and tile antenna (aerial), the image on tile
TV screen may be distorted. In this case, place the
antenna (aerial) farther away from the receiver.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tips
• To o/ltp/lt tile sound of tile TV from tile
speakers
connected to
the receiver, be
sure to
connect the audio output jacks of the TV to tile
TV IN jacks of tile receiver.
turn off tile TV's volume or activate tile TV's
muting fimction.
• All tile digital audio jacks are compatible with
32 kHz. 44.1 kHz. 48 kHz. and 96 kHz sampling
frequencies.
2Ws