Sony STR-DG820 Operating Instructions Manual page 15

Name
ENT/MEM
CLEAR/>10
4-
[] SHIFT
Function
Press SHIFT/[]) and then
press ENT/MEM to enter the
value after selecting a
cham_el, disc or track using
the numeric buttons of tile
VCR. CD player, VCD
player, LD player. MD deck.
DAT deck. tape deck. satellite
tuner. Blu-ray disc recorder.
or PSX.
To enter the wdue of Sony
TV. press TV/[_/and then
press ENT/MEM.
Press SHIFT/[]) and then
press ENT/MEM to store a
station during tuner operation.
Press SHIFT ([]) and then
press CLEAR/>I0 to clear a
mistake when you press the
incorrect numeric button of
the DVD player, Blu-ray disc
recorder. PSX. satellite tuner.
DVD/VHS COMBO. or
DVD/HDD COMBO.
Press SHIFT ([]) and then
press CLEAR/>](I to select
track numbers over 10 of the
CD player, VCD player. LD
player. MD deck. tape deck.
TV. VCR. or satellite tuner.
Press SHIFT ([]) :rod then
press -/-- to select the ch:mnel
entry mode. either one or two
digit of the VCR or satellite
tuuer.
To select the channel entry
mode of the TV, press TV
([_) and then press -/-.
Press to light up the buttons. It
changes the remote button
fimction to activate the
buttons with pink printing.
Name Function
[] THEATER Press to ei!joy optimal image
suited lk_r movies and to
output the sound from the
speakers connected to this
receiver automatically.
Note
This button will only function
if your TV is compatible with
Theater Mode. Refer to the
operating instructions
supplied with the TV for
details.
[] RM SET UP Press to sel up the remote.
a/This button is :dso available lk_r DIGITAL MEDIA
PORT adapter operation. For details on the
function of tile button, refer to tile operating
instructions supplied with tile DIGITAL MEDIA
PORT adapter.
blThe immber 5/SAT. TV CH +/PRESET + :rod 1::>/
CATEGORY MODE buttons have tactile dots.
Use the tactile dots as references when operating
the receiver.
Notes
•Some fimctious exph,ined in this section may not
work depending on the modeh
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
if)
I'D
5'
I'D
D.
15us