Sony STR-DG820 Operating Instructions Manual page 46

Adjusting the level
(LEVELmenu)
You can use the LEVEL menu to adjust the
balance and level of each speaker. These
settings are applied to all sound fieMs.
Select "LEVEL" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 42) and
"Overview of the menus" (page 43).
LEVEL menu parameters
• TEST TONE (Test tone)
Lets you adjust tile speaker levels and
balance while listening to the test tone from
your listening position.
• OFF
The test tone is turned off.
• FIX mmm _-
The test tone is output from the speaker you
have selected.
• AUTO mmm*
The test tone is output from each speaker in
sequence.
"=mmm represent a speaker channel.
• P. NOISE (Phase noise)
• OFF
The phase noise is turned oft'.
• FL/SR, SL/FL, SBL/SL, SBR/SBL,
SR/SBR, SR/SL, FR/SR, FR/SL, CNT/FR,
FL/CNT
Lets you output the test tone sequentially
from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
• P. AUDIO (Phase Audio)
• OFF
• FL/SR, SL/FL, SBL/SL, SBR/SBL,
SR/SBR, SR/SL, FR/SR, FR/SL, CNT/FR,
FL/CNT
Lets you output front 2 channel source sound
(instead of the test tone) sequentially t_om
adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
• FL LEVEL (Front left speaker
level)
• FR LEVEL (Front right speaker
level)
• CNT LEVEL (Center speaker
level)
• SL LEVEL (Surround left speaker
level)
• SR LEVEL (Surround right
speaker level)
• SB LEVEL (Surround back
speaker level)
• SBL LEVEL (Surround back left
speaker level)
• SBR LEVEL (Surround back
right speaker level)
• SW LEVEL (Subwoofer level)
Note
Depends oil tile speaker pattern setting, some
parameters may not be available.
46us