Section 1: Introduction And Safety; Introduction; Read This Manual Thoroughly; Intended Applications - Generac Power Systems MIH1.2 Owner's Manual

Section 1: Introduction and Safety

Introduction

Thank you for purchasing a Generac Mobile product.
This unit has been designed to provide high-perfor-
mance, efficient operation, and years of quality use when
maintained properly.
The MIH1.2 indirect fired heater is designed and built for
sustained, reliable heat production in industrial operating
conditions and environments. The MIH1.2 is built to with-
stand frequent handling under these conditions.
The unit is mounted on a trailer that has forklift access
and chain attach points on both sides. The fully enclosed
design protects the operating components, allowing all-
weather storage and operations.
The information in this manual is accurate based on
products produced at the time of publication. The manu-
facturer reserves the right to make technical updates,
corrections, and product revisions at any time without
notice.

Read This Manual Thoroughly

WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
If any section of the manual is not understood, contact
your nearest Generac Mobile Authorized Service Dealer
(GMASD), visit www.generacmobileproducts.com, or
contact Generac Mobile Customer Service at 844-275-
4672 with any questions or concerns.
This manual must be used in conjunction with all other
supporting product documentation supplied with the
product.
SAVE THESE INSTRUCTIONS for future reference. This
manual contains important instructions that must be fol-
lowed during placement, operation, and maintenance of
the unit and its components. Always supply this manual
to any individual that will use this unit, and instruct them
on how to correctly start, operate, and stop the unit in
case of emergency.

Intended Applications

The machine is designed for industrial use. Examples of
intended applications include, but are not limited to:
•
Gas and oil exploration
•
Utilities and power plants
•
Mining
•
Construction
•
Agricultural applications
Owner's Manual for Indirect Fired Heater
•
Employee locker areas and housing
•
Emergency thawing
•
Pre-warming of equipment and motors
•
Offshore drilling rigs
•
Painting and coating locations
•
Airline hanger heat
•
Dehumidification
Using this machine for applications other than its
intended purpose may void the warranty. Examples of
misuse include, but are not limited to, using the machine:
•
To transport persons or equipment.
•
As a tow vehicle.
•
As a ladder or work surface.
•
During extreme weather.
•
Indoors.
•
If it is incorrectly serviced or maintained.

Safety Rules

The manufacturer cannot anticipate every possible cir-
cumstance that might involve a hazard. The alerts in this
manual, and on tags and decals affixed to the unit, are
not all inclusive. If using a procedure, work method, or
operating technique that the manufacturer does not spe-
cifically recommend, verify that it is safe for others and
does not render the equipment unsafe.
(000100a)
Throughout this publication, and on tags and decals
affixed to the unit, DANGER, WARNING, CAUTION, and
NOTE blocks are used to alert personnel to special
instructions about a particular operation that may be haz-
ardous if performed incorrectly or carelessly. Observe
them carefully. Alert definitions are as follows:
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
DANGER
WARNING
(000001)
(000002)
1