fantastic furniture Elevate Assembly Instructions Manual page 12

Step 8
You will need
3 x Screws
1 x Adaptor
(H11)
(H9)
Phillips Head
3 x Cable Ties
Screwdriver
(H12)
H9
1
Peel O Sticker
Connect the adapter (H9), cotroller (H8) and motor together as shown.
We have provided 3 x cable tie organisers with this desk if you would like to use them.
Peel o the backing sticker. Stick on the underside of the desk as shown.
We have provided 3 pre-drilled holes as suggested locations.
You can choose to fix the cable ties with 3 x screws (H11), tightening with a phillips
head screwdriver.
Insert cable through the strap, and tighten the strap.
fantasticfurniture.com.au
Connect Power Cable
to controller (H8).
H9
H8
2
H12
Tighten Up
Screws (Optional)
H8
(P1)
3
H11
Insert cable through the strap
Interface
for Motor cable
Tighten the strap
Page 12