SANY SSP90C-8 Safety, Operation And Maintenance Manual page 17

SSP90/100C-8 Paver Introduction
Replace the manual if it is lost or damaged.
Due to improvement and updating of prod-
ucts, some information may differ from the
machine. In case of any question on the ma-
chine, contact Sany distributor before operat-
ing or maintaining the machine.
1. Introduction
This section provides an overview of what is
covered in the rest of this manual, including
machine label information and SANY contact
information.
2. Safety
This section covers basic safety information
relating to this machine. Make sure you fully
understand all the precautions described in
this manual and the safety labels on the ma-
chine before operating or maintaining this ma-
chine. Failure to do so may result in serious
injury or death.
3. System functions
This section provides an overview of all the
controls, prompts and operating systems of
the machine. Only when you are familiar with
all systems, can you operate and maintain the
machine safely.
4. Operation
This section provides the basic operating pro-
cedures for the job. It is important to learn and
get familiar with all procedures before per-
forming any operations with the machine.
5. Maintenance
This section provides all general maintenance
and repair procedures. It is important to learn
and get familiar with all the maintenance and
repair procedures before performing any
maintenance or repair operations on the
machine.
Safety, Operation and Maintenance Manual-December 2018 1-5