Table of Contents
Advertisement
General – Concerning your safety
1.2.5 Working on heating elements
1.2.6 Cleaning work
16
When working on the battery do not smoke, do not use open fire.
Do not let acid come in contact with hands or clothes. When
injured by acid, flush off with clear water and seek medical advice.
Metal objects (e.g. tools, rings, watch straps) must not come in
contact with the battery poles – danger of short circuit and burning!
When recharging non-serviceable batteries remove all plugs, to
avoid the accumulation of explosive gases.
When recharging switch off the charging current before removing
the charging clamps.
Ensure sufficient ventilation, especially if the battery is to be
charged in a closed room.
Dispose of old batteries according to regulations.
Danger to life! High voltage 230/400 Volt!
Work on the electric heating system must only be carried out by
persons who have been trained for these activities.
Heating elements must only be changed with the engine shut down
and the main battery switch pulled out.
The heating elements become very hot during operation. Allow to
cool down to an appropriate level before disassembling the heating
elements.
After replacing a heating element you should generally perform an
insulation and PE-conductor measurement!
Be extremely cautious when performing cleaning work with the
engine running.
Allow the engine to cool down before starting cleaning work on
engine and exhaust system.
Never use gasoline or other easily inflammable substances for
cleaning.
When cleaning with steam cleaning equipment do not subject elec-
trical parts and insulation material to the direct jet of water, or cover
it beforehand.
Do not guide the water jet into the exhaust pipe and into the air
filter.
BM 1000/35
Advertisement
Table of Contents
