Repair; Signage - Fayat Group BOMAG BW 174 APO-4i Service Manual

Tandem vibratory roller
Table of Contents

Advertisement

General – Concerning your safety
1.2.8.7
Cleaning work
1.2.8.8
After maintenance work

1.2.9 Repair

1.2.10

Signage

30
BW 174 APO-4i / BW 174 AP-4i / BW 174 ACP-4i AM / BW 174 AP-4i AM
Do not perform cleaning work while the motor is running.
Allow the engine to cool down before starting cleaning work on
engine and exhaust system.
Never use gasoline or other easily inflammable substances for
cleaning.
When cleaning with a high pressure cleaner, do not subject elec-
trical parts and insulation material to the direct jet of water, or cover
them beforehand.
Do not guide the water jet into the exhaust pipe and into the air
filter.
Reassemble all guards and protective devices.
Close all maintenance flaps and maintenance doors again.
Identify a defective machine with a warning sign.
Only operate the machine after it has been repaired.
Repairs must only be performed by an expert/qualified person.
When replacing safety relevant components, only original spare
parts must be used.
Keep stickers and signage in good and legible condition and
comply with their meaning.
Replace damaged and illegible stickers or signage immediately.

Advertisement

Table of Contents
loading

Table of Contents