Maintenance; Information About Guarantee - Be Cool saturn Manual

EN
Step 4) 18 Put the child into the safety seat, adjust the
headrest up and down according to the height of child.
Step 5) Pull out the adult 3-point belt, D: Clip the
vehicle shoulder belt into the belt guide hook of the
headrest, and then clip vehicle shoulder and lap belt
together into the belt guide slot on the side of the seat,
finally lock the buckle.
Usage 2: only 3 point belt. Altura: 105-150cm
Step 1) Store the support leg 19.
A Press and hold the adjustment button on the support
leg , and stow the support leg.
B Then lift the seat and fold the support leg back into
the seat bottom groove.
C Finally, push the front protruding part inward.
Step 2) Put the child into the safety seat, adjust the
headrest up and down according to the height of
child 18.
See page 14, 3.6 "How to store the buckle and shoulder
36 strap sleeve" to remove the parts.
Step 3) Pull out the adult 3-point belt, D: Clip the
vehicle shoulder belt into the belt guide hook of the
headrest, and then clip vehicle shoulder and lap belt
together into the belt guide slot on the side of the seat,
finally lock the buckle.
* When using, it should be confirmed that the buckle of
the adult 3-point belt does not interfere with the main
load-bearing contact point of the child restraint system.
If in doubt, pls contact the manufacturer of the child
restraint system.
A Small Headrest +Cushion. B Shoulder sleeves /
Shoulder straps. C Triangle sponge. D Crotch pad.
Buckle.
E

5.1 MAINTENANCE

In daily use, check periodically the child seat. The child
seat should be replaced after an accident. Please keep this
child seat in dry and ventilated place to avoid damp moldy.
If the child seat becomes dusty,clean the seat belt and
the plastic pieces by swiping them with a damp sponge
and let it dry under ambiance.
If food or drink drop accidently on the buckle, disas-
semble the seat belt from the child seat and rinse it
gently by warm water. Leave it dry under ambiance .
For cleaning the entire child seat fabric cover,please
refer to the 5.2 washing instruction.
5.2 DISASSEMBLY
A Remove the button first.
B Take off the cushion.
C Take off the Triangle sponge .
D Open both shoulder sleeves .
E Remove the cover on the headrest.
F Finally, remove the cloth cover along the edge of the seat.
6 THE MAIN TECHNICAL PARAMETERS
Distance from front to back of the seat:537mm.
Distance form left to right of the seat:440mm.
Height of the seat:572mm.
Weight of the seat:11.5±0.5kg.
INFORMATION ABOUT THE GUARANTEE
- This item is guaranteed against manufacturing
defects as stipulated in the legal Directives and/or
regulations in force on guarantees for consumer goods
applicable to the European Union and those of the
country in which it is marketed.
- It is essential to present the purchase invoice or
receipt in order to process the guarantee through
the seller of the item or, failing that, through the
manufacturer.
- The guarantee excludes anomalies or faults caused
by misuse, non-compliance with the safety regulations
and instructions for use and maintenance provided, or
due to wear and tear caused by normal use and regular
handling of the item.
- The label containing the serial number of your model
must not be torn off under any cir-cumstances as it
contains information relevant to the guarantee.
EN
37