Usage - Be Cool saturn Manual

EN
1. PHandle of headrest
2. Headrest
3. The guide groove of the headrest
4. Rear cover board (instruction
manual inside)
5. Shoulder sleeves
Shoulder strap
6.
7. Comfortable cushion
8. Buckle
9. Crotch pad
10. The guide groove of the body
(Used for 105-150cm)
30
11. Adjuster button
12. Angle adjuster
13. Rotation adjuster
14. Harness adjuster strap
15. Support leg release button
16. ISOFIX attachment
17. ISOFIX release button
18. Base
19. Support leg
ISOFIX guide sleeve
20.
21. Side impact protect system (Optional)
SATURN: Height: 40-150 CM. Weight: 0-36 KG. i-Size
booster seat Enhanced Child Restraint System

3.1. USAGE

3.1- INSTALL POSITION OF THE CHILD SEAT IN VEHICLE
A Shoulder belt.
Lap belt.
B
C ISOFIX anchorages.
Proper installation.
Improper installation.
Only suitable if the approved vehicles are fitted with 3
point safety-belt, approved to UN/ECE Regulation No.16
or other equivalent standards.
ISOFIX Anchor points for car seats.
Not to use in seating positions where an active
frontal airbag is installed.
Only use on this seat if ISOFIX anchorages are
fitted.
3.2- ADJUST THE HEADREST
As shown in the picture, you can adjust the headrest
up and down by pulling on the headrest adjustment ta
1 and adjust the headrest to a position suitable for the
child's head.
3.3- CHECKING THE SHOULDER STRAP HEIGHT
Always check that the shoulder straps are at the
correct height for your child.
The child's shoulder straps should always be threaded
through the slots in the cover and seat shell that are
closest to the top of your child's shoulders.
3.4- USAGE OF BUCKLE
8 Get the left and the right pieces of buckle together.
Insert the two pieces into the slot of the buckle .At
the same time, hearing "click" means the buckle
gets stuck, pull the pieces of the buckle and check
whether the buckle is locked correctly.
* If you want to release the safety belts, it needs to
press the red button, then the pieces pop up.
EN
31