Oneida Air Systems Dust Deputy Low-Pro Manual page 9

Assembly Instructions
Apply the 5/8" Gasket (B) onto the Lid Separator (A) along
2
the underside rim. [FIG. 2]
Apply the 1/4" Gasket (C) perpindicular to the 5/8" Gasket
along the lip of the Lid Separator. The 1/4" Gasket will
follow the inner diameter of the 5/8" Gasket. [FIG. 2]
Note: The Gasket should overlap around the circumference,
firmly pressing against itself to avoid air leaks. Dust collection
systems cannot operate effectively if there isn't a complete seal.
There must be NO air leaks.
B
B
C
C
C
B
FIG. 2
oneida-air.com 9