Oneida Air Systems Dust Deputy Low-Pro Manual page 11

Assembly Instructions (Continued)
If you did not purchase the Deluxe Unit, proceed to Step 9.
4
Insert the Casters (I) into the Caster Mounts (G). Apply
pressure and twisting motion until Wheels snap into place
[FIG. 4].
Ensure that the surfaces on the Bucket (F) and Caster
5
Mounts (G) are clean and dry. Remove a square from the
Double Sided Tape (H) and apply to the Caster Mount in
the recessed location at each corner [FIG 5].
G
I
FIG. 4
G
FIG. 5
oneida-air.com 11