Oneida Air Systems Dust Deputy Low-Pro Manual page 10

Assembly Instructions
Secure each Latch (D1) to the previously installed Pem Stud
3
(D2) on the Lid Separator (A) using one Wire Spring Clip
(D3), one Washer (D4), and one Wing Nut (D5) as shown
in [FIG. 3].
Note: Refer to Optional Grounding Instructions prior to
instaling the Latch Hardware Pack (D) if necessary.
10 Oneida Air Systems
D5
D4
D3
D1
FIG. 3
D2