Advertisement
9. Check whether the
lamp is firmly seated on
the mounting plate. The
lamp is prefocused and
does not require any
adjustment.
10. Replace front cover.
Cleaning the film path
1. Remove front cover
(15).
2. Turn focusing knob (4)
fully clockwise.
o
..
*
1.
—
3. Turn master switch (10)
fully counterclockwise
(rewind position). This will
open all film-path guides.
4. Grasp lower end of
pressure-plate assembly
(26) with your left thumb
and index finger, depress
the spring bracket with
your index finger and pull
the assembly straight for¬
ward, taking care not tilt
it to the left. The pressure
plate and film aperture can
now be cleaned.
27
Advertisement
