Advertisement
These are intended ex¬
clusively as a general out¬
line and for quick future
reference. They cannot
and will not replace the
detailed explanations on
the following pages.
1. Set speed selector (21)
to the speed with which
your film was exposed in
the camera (18 or 24 fps).
0
, -is
2. Turn master switch (10)
clockwise to its first stop
and insert film leader
about 4 inches or 10 cm
into the film-threading slot
below the white guide
roller until it is gripped by
the threading mechanism
and automatically wound
on the take-up reel.
3. Turn master switch (10)
further clockwise to either
silent projection or sound
projection, as required.
8
Advertisement
