Advertisement
Master switch (10)
lowing clockwise are silent
Framing knob (3)
Focusing knob (4)
This is the main control of
projection and sound pro-
When you start projecting.
The extra-large focusing
your T2000. Its normal
jection.
it may happen that the
knob makes focusing par-
position is with the white
separating line betweeen
ticularly easy and smooth
index dot on the knob
Counterclockwise rotation
frames becomes visible on
- a point of major impor-
facing up, opposite 'O'.
of the master switch will
the screen. This can easily
tance in the projection of
Even in this position,
set your projector for fast
be corrected by turning the
Super-8 or Single-8 film
however, the amplifier is
rewind, either through the
framing knob. When the
where even very slight
switched on as soon as the
film path (should the film
frame line has been set, it
axial shifting of the lens
power cord is plugged into
still be attached to the
does not normally require
will result in a noticeable
a wall outlet.
take-up reel) or outside,
readjustment during pro-
change in focus on the
directly from reel to reel.
jection.
screen.
The symbols around the
master switch are easy to
understand. The arrows
indicate motion directions.
Clockwise, the first stop
thus stands for film thread¬
ing (downward motion of
film across film gate). The
next two positions fol-
10
Advertisement
