Advertisement
5. Use the brush supplied
with your projector and
clean the film gate, the film
path leading past the sound
heads (27) and up to the
film exit at the rear.
6. To clean sound heads
(27), use a cotton swab
soaked in alcohol or a
special sound-head spray.
Never
touch magnetic
heads with a metallic
object, such as a screwdriv¬
er!
Replace parts in the reverse
order.
Should you ever wish to
remove a film in mid-reel,
proceed in the same man¬
ner. With master switch
(10) on rewind and the
pressure plate removed,
you can carefully extract
the film from the film path.
To extract the film from
under one of the last rollers
on the left, it is necessary
to pull off the knob of
master switch (10). When
replacing the knob, be
careful to push it on in the
proper position: white
index dot on left ( = rewind
position).
Advertisement
