Advertisement
18
You are now familiar with
the different controls and
functions of your
projector.
To project your movies,
proceed as follows:
1. All your films should
have a sufficient length
of leader at eitheF end.
Before threading, check
the leader on the supply
reel and make sure that it
is neither bent nor
damaged. If necessary, cut
the leader straight at its
front end.
2. Shift speed selector (21)
at the top of the projector
to the speed used in your
camera for shooting.
17
3. Insert the film leader
threading operation from
into the threading slot (7)
reel to reel is automatic,
below the white guide
except for insertion of the
roller and turn master
leader.
switch (10) to its threading
position. The leader
should be pushed into the
slot some 4 inches or
10 cm deep, until it is
positively gripped by the
drive mechanism and
automatically threaded
through the film path.
Keep the master, switch on
threading until the leader
emerges in the take-up
reel and is tightly wound
around it. The entire
Advertisement
