REID LIFTING TESTDAVIT Assembly & Operation Manual page 13

1
Position the over the test davit
ensuring the trolley sits directly above the shackle
on the beam.
*Please refer to the correct operations and assembly guide for the relevant
2
Fit the chain block and the loadcell in between the
trolley on the gantry and the shackle on the test
davit.
before use. These can be found online at REIDLIFTING.COM.
3
Ensuring the loadcell reads 0 before starting. Apply
load to the test davit using the chain block. Once
the required loading has been achieved hold the
load for the amount of time determined by the
local authority regulations. De-load the test davit by
reversing the chain block.
13