Raymarine QUANTUM 2 Installation Instructions Manual page 48

Scenario 1: Using separate power and data cables
1. RayNet data connection. (This connection is not required if connecting to
the MFD via Wi-Fi.)
2. 12 V / 24 V power connection, via the supplied power cable.
Note:
• Not all Quantum™ radar variants are supplied with a RayNet cable. For
more information, refer to: p.14 — Document information
• For information on suitable accessory RayNet cables, refer to:
p.79 — Spares and accessories
48
Scenario 2: Using an existing combined power / data cable from an older
Raymarine Digital Radar