Cable Routing - Pole Mount - Raymarine QUANTUM 2 Installation Instructions Manual

Scenario 2: Using an existing combined power / data cable from an older
Raymarine® Digital Radar
Cables and connections — General information
1. RayNet data connection. (This connection is not required if connecting
to the MFD via Wi-Fi.). This cable is part of the A80308 Y-adapter
accessory cable.
2. 12 V / 24 V power connection. This cable is part of the A80308 Y-adapter
accessory cable.
3. A80308 Y-adapter accessory cable (not supplied with the scanner).
4. Existing combined Digital Radar power / data cable.
Cable routing — pole mount
There are 2 typical cable routing scenarios for pole mount installations.
1. Using separate power and data cables.
2. Using an existing combined power / data cable from an older Raymarine®
Digital Radar scanner. In this scenario, the A80308 Y-adapter accessory
is required (not supplied with the scanner).
Note:
The routing options described and illustrated in this section assume that
a physical data connection is used between your Radar scanner and
multifunction display (MFD) / chartplotter. However, if the Radar scanner
is connected to your MFD via Wi-Fi, a physical RayNet connection is not
required.
47