To Prepare For Use; To Adjust The Supporting Legs - Rigol DG800 Pro Series Quick Manual

To Prepare for Use

5
To Prepare for Use
5.1

To Adjust the Supporting Legs

Adjust the supporting legs properly to use them as stands to tilt the instrument
upwards for stable placement of the instrument as well as better operation and
observation. You can also fold the supporting legs when the instrument is not in use
for easier storage or shipment, as shown in the figure below.
5.2 To Connect to Power
The power requirements of this signal source are USB PD 15 V, 3 A. Please use the
power adaptor provided in the accessories to connect the instrument to the AC
power source (100 V to 240 V, 50 Hz to 60 Hz), as shown in the figure below.
DG800 Pro Quick Guide
12
Supporting Legs
(a) Unfold the supporting legs
Figure 5.1 Adjust the Supporting Legs
(b) Fold the supporting legs
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.