Basket Lift Cam Switch - Vulcan-Hart GRC35 Service Manual

GR SERIES GAS FRYERS - REMOVAL AND REPLACEMENT OF PARTS
5. Remove screws securing basket lift motor to cam
bracket, then remove motor from bracket.
6. Reverse procedure to install and check for proper
operation.
NOTE: After reinstalling motor keep all wire leads
clear from moving parts.
F-25114 Rev.A (07-03)

BASKET LIFT CAM SWITCH

WARNING: DISCONNECT THE
ELECTRICAL POWER TO THE
MACHINE AND FOLLOW LOCKOUT /
TAGOUT PROCEDURES. THERE MAY
BE MULTIPLE CIRCUITS. BE SURE
ALL CIRCUITS ARE DISCONNECTED.
1. Remove basket lift cover as outlined in "BASKET
LIFT COVERS" under "COVERS AND PANELS".
2. Remove basket lift tube as outlined under "BASKET
LIFT TUBE".
3. Disconnect lead wires from cam switch.
4. Remove screws securing cam switch to cam bracket.
5. Reverse procedure to install.
– 16 –