Lamp Operating Modes - Reef Factory Reef flare Pro Series User Manual

III. Lamp operating modes
The first thing you should do is to set the lamp lighting parameters.
In order to perform the settings, log in to the Smart Reef system in the
mobile application or at www.reeffactory.com. Then select the Reef
Flare device from your aquarium list by clicking on its name.
By default, the lamp is programmed to emit a range of light in a way that corresponds to the natural mode
of day and night. The user can change the parameters using the additional functions described below:
- PROGRAMS - allows you to individually set the time of switching on and off
the lamp. At the same time, it is possible to adjust the lighting power. After
setting the parameters, the lamp system suggests the current lamp power and
its operating temperature. After setting the parameters of the lamp operation,
remember to save its settings by adding your program (the function is
available on the right side in the upper part of the screen). You can create
many own lamp operation plans (so-called presets), each of them can be
saved and run at any time In addition, you can export your own settings (e.g. in
order to transfer them to another person) or import other settings (e.g. from
other users).
More about them in the chapter "Presets"
Reef Factory 2022
User Manual Reef Flare Pro ©
9