Reef Factory Reef flare Pro Series User Manual page 4

Connection to the power supply
After the installation, connect the power
supply to the lamp using the dedicated
power adapter included in the set, as shown
in the picture.
Attach the cable between the lamp and the
power supply according to the instructions
in the assembly kit. Wind up the cable
between the power supply and the AC
network as shown in the picture.
Make sure that the lamp's cooling system can work freely, taking in air from above and distributing it to the
sides. The hose or fitting must not block the airflow.
Reef Factory 2022
User Manual Reef Flare Pro ©
4