Installation Of The Device - Reef Factory Reef flare Pro Series User Manual

Installing the lamp
Using the dedicated mounting system, install the lamp
above the aquarium so that it illuminates the bottom of
the tank as much as possible.
The lamp should be installed at a minimum height of 20
cm above the waterline.
Use of Reef Factory mounts
To properly mount the lamp, use one of the dedicated mounting systems offered by Reef Factory. Follow
the instructions attached to it. You can find it by scanning the QR code next to it or at this link
www.reeffactory.com/flaremountingkit.
The mounting kit is sold separately.
After assembly, check that all components are properly tightened to avoid possible damage to
the device.
User Manual Reef Flare Pro
I. Installation of the device
Reef Factory 2022
©
3