Sony STR-DG800 Operating Instructions Manual page 84

To record digital sound
Connect a component for playback to tile
digital audio input (OPTICAL IN)jack, and
connect the recording component to the
OPTICAL MD/TAPE jack.
You can record from a video component using
the receiver. See the operating instructions
supplied with your recording component.
1
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2
3
4
Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
Prepare the recording
component.
Insert a bhmk "ddeo tape, etc. into the
recording component (VIDEO 1) for
recording.
Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Some sources cont_fin copy gnm'ds to prevent
recording. In this case, you may not be able to
record from the source.
• The audio signals input to the MULTI CH lN.jacks
are not output from the analog AUDIO OUT jacks
even when MULTI CH IN is selected. The analog
audio signals of the current or previously used
input are output.
84us