Sony STR-DG800 Operating Instructions Manual page 83

Usingthe SleepTimer
You call set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
24)0-00 --+ 1-30-00 _ 1-00-00 _ 0-30-00
OFF
When Sleep Timer is being used, "SLEEP"
lights up on the display.
Tip
To check the remaiuing time belore the receiver
turns ofli press SLEER The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
Recording usingthe
receiver
You can record onto a MiniDisc or audio tape
using the receiver. See the operating
instructions supplied with your MD deck or
tape deck.
1
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2
3
4
Prepare the playback
component for playing.
For example, insert a CD into the CD
player.
Prepare the recording
component.
Insert a blank MD or tape into the
recording deck and adjust the recording
level.
Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Sound adjustments do nut affect the sigu:d output
frum the MD/TAPE OUT jacks.
• The audiu signals input to the MULTI CH IN.jacks
are not output from the analog AUDIO OUT jacks
even when MULTI CH IN is selected. The analog
audiu signals of the current or prcviuusly used
input are output.
o
0
"IJ
o
continued_
83us