Menu - Sony STR-DG800 Operating Instructions Manual

Using the controls on the
receiver
1 Turn INPUT SELECTOR to select tile FM
or AM band.
2 Press TUNING MODE repeatedly to select
"PRESET TUNING".
3 Turn TUNING +/- to select the preset
station you want.
2
3
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
Tune in the preset station you
want to create an index name
for (page 70).
Press AMP, and then press
MENU.
"I-LEVEL SET" appears on tile display.
4
5
Press control button e/_
repeatedly to select "4-TUNER
SET".
Press the control button or
control button * to enter the
menu.
O Press control button €/_
repeatedly to select "NAME IN".
7 Press the control button or
control button * to enter the
parameter,
The cursor flashes and you can select a
character. Follow the procedure given in
"To create an index name" below.
To return to the previous display
Press control button _,.
To create an index name
1
Use control bntton tl./!1./_,/,_, to create an
index name.
Press control button tl./I!, to select a
character, then press control button I,/* to
move the cursor to the next position.
If you made a mistake
Press control button _,/* until tile character
you want to change flashes, then press
control button €/€ to select the correct
character.
Tip
You can select the character type as li_llows by
pressing control button t_/t!,.
Alphabet (upper case) -+ Numbers -+ Symbols
2
Press the control button.
The entered name is registered.
o
O
"o
-1
71us