EcoFlow Smart Home Panel Installation Manual page 11

No.
Connect the DELTA Pro and Smart Home Panel using the Infinity cable. For split-
8
phase, two DELTA Pros and two infinity cables are required. Turn on the main power
button of DELTA Pro, then press the On/Off button (AC button, near the infinity port)
on the SHP to enable each DELTA Pro.
Switch the power supply from grid to power station for each channel via the app.
9
Check whether the switchover is successful and there are no errors reported on the
app. Follow the instructions on the app to fix the errors if any.
Set up the charging for DELTA Pro on the app (if AC grid charging is desired), check
10
whether the DELTA Pro is recharged successfully and there are no errors reported on
the app. Follow the instructions on the app to fix the errors if any.
9
Checklist Status