Enclosure Mounting - (Bu10/15/20/30) - EndurEnergy Systems ESP-BCU HL User Manual

5.2.2

Enclosure Mounting - (BU10/15/20/30)

1. Place the enclosure in the location desired (refer to the details about the installation
location described in Chapter 4.2). The enclosure should be moved close to its
installation location inside its shipping container before it is unpacked. The enclosure
must be installed in a structurally sound area with a level floor that is able to bear the
weight of the enclosure + the weight of the battery control unit + the intended number
of batteries to be installed inside.
NOTICE
Our enclosure solutions are designed for outdoor installations rated IP55 / NEMA 3R.
17