Installation Location; Tools - EndurEnergy Systems ESP-BCU HL User Manual

4.2

Installation Location

Ensure that the installation location meets the following conditions:
⚫ The building is designed to withstand earthquakes as per the building code (when
applicable).
⚫ It is far away from the sea to avoid saltwater and humidity.
⚫ The floor is flat and level.
⚫ There are no flammable or explosive materials nearby.
⚫ The optimal ambient temperature is between 15°C and 30°C.
⚫ The temperature and humidity remain at a constant level.
⚫ There is minimal dust and dirt in the area.
⚫ There are no corrosive gases present, including ammonia and acid vapor.
⚫ The battery and racks are rated IP20, indicating that they are suitable for indoor
use, if required to be placed outside it will require an enclosure or cabinet.
If the ambient temperature is outside the operating range, the battery control unit will
protect itself by shutting down. The optimal operating temperature for the battery is 15°C
to 30°C. Frequent exposure to severe operating conditions would negatively affect the
performance and lifespan of the battery.
4.3

Tools

To install the battery control unit, the following tools are required:
Flat-head &
Phillips
Screwdriver
Voltmeter
To ensure the safety of the operator and installer, please select and use suitable tools
and measuring instruments that are certified for precision and accuracy.
Torque wrench
Measuring tape
12
Cable crimper
Drill
Wire clamp
Bubble Level