Using A Timer - Sony MDS-JB940 Operating Instruction

a m
Using a timer
By connecting a timer (not supplied) to the deck, you can
start and stop playing/recording operations at specified
times. For further information on connecting the timer or
setting the starting and ending times, refer to the
instructions that came with the timer.
TIMER PLAY MODE
Playing an MD using a timer
1 Do steps 1 to 3 of "Playing an MD" on page 23.
2 Press PLAY MODE repeatedly to select the play
mode you want.
'To play only specific tracks, create a program (see
N.
To specify the time for the end of playing. press E> to
art playing, then go to step 3.
3 Set TIMER on the deck to PLAY.
Set the timer as required.
+ When you have set the time for the st
the deck turns off, When the specified 1
the deck turns on and starts playing.
+ When you have set the time for the end of playing.
play continues, When the specified time arrives, the
deck stops playing and turns off.
'© When you have set the time for both the start and
end of playing. the deck turns off. When the starting
time arrives, the deck turns on and starts playing.
When the ending time arrives. the deck stops
playing and turns off
5 Aher you have finished using the timer, set TIMER.
on the deck to OFF.
Recording to an MD using a timer
1 Do the following steps of "Recording to an MD" on
page 14 according to how you want to use the
timer.
To specify the time for |00
The ta of recording Steps 1106. then pres
The end of recording Steps 109 =|
Both start and end of
recording
Steps 1 106. then press Ml
j
58 42 | Using a timer
2 Set TIMER on the deck to REC.
3 Set the timer as required.
+ When you have ser the time for the start of
recording, the deck turns off. When the specified
time arrives, the deck tums on and starts recording
* When you have set the time for the end of recording,
recording continues. When the specified time
arrives, the deck stops recording and turns off.
* When you have set the time for both the start and
end of recording, the deck turns off. When the
starting time arrives. the deck turns on and starts
recording. When the ending time arrives, the deck
stops recording and turns off.
4 After you have finished using the timer, set TIMER
'on the deck to OFF. Then change the deck to
'standby mode by plugging the AC power cord of
the deck into a wall outlet or set the timer to
continuous operation.
+ If TIMER is left at REC, the deck will automatically
start recording the next time you turn on the deck
rou do not change the deck to standby mode for
we than a week after timer recording has finished,
sconded contents may disappear the
Make sure to change the deck to standby mode
within a week after timer recording is
completed.
'The TOC on the MD is updated and recorded contents are
'written to the MD when you turn on the deck. If the
recorded contents have disappeared, "Initialize" Na
'when you turn on the deck.
Notes
may take about 30 seconds after the deck is tumed on until
ng stars, When recording at a specified time using
mer, be sure to account when setting
recording start t i m e .
+ During timer recording, new material is recorded fro
of the recorded portion on the MD.
* Material recorded during timer recording will be saved tothe
dise the next time you turn on the deck. "TOC Writing" will
flash in the display at that time. Do not disco
power cord or move the deck white
+ Timer recording wil stop if the disc becon
hes
theend