Adjusting The Recording Level - Sony MDS-JB940 Operating Instruction

Adjusting the recording
level
You can adjust the recording level for both analog and
digital recordings.
EC LEVEL
DISPLAY/CHAR
1 Do steps 1 to 6 of "Recording to an MD" on
page 14.
2 Play the portion of the program source with the
strongest output.
3 Press DISPLAY/CHAR (or DISPLAY) repeatedly
until the level of the input signal appears.
4 While monitoring the sound, turn REC LEVEL (or
press REC LEVEL/ANALOG OUT LEVEL +/—
repeatedly) to raise the recording level to its
highest level without turning on the two rightmost
indicators on the peak level meters.
san 01 Buipi |
Input Level, y
Anls+12. 0dB4
Avoid turning on these Indicators
latte
5 Stop playing the program source.
6 To start recording, continue from step 8 of
"Recording to an MD" on page 14.
In this case, ship step 3 above.
TË vou can use the Peak Hold Function
"The function freezes the peak level meters at the highest level
reached by the input signal
Menu" appears in the display
2 Tum AMS (or press KEP repeatedly) unti
{factory setting) appears then press AMS or YES,
3 Turn AMS (or press K€ OPA repeatedly) to select
"PHold On", then press AMS or YES.
4 Press MENU/NO.
To tum off the Peak Hold Function select "PHold ONT in step 3
above,
Hold ON
Recording for long times/Adjusting the recording level | 17 SE