Rear Panel Description - Sony MDS-JB940 Operating Instruction

[7] SLEEP indicator (41)
Lights when the deck is set to tum off automatically
after specified minute,
(8) Level meters
Display the audio signal levels during playing and
recording,
Note
The display format that you have selected in each of the deck
statuses (play, recording, e t e . ) wil appear whenever the deck
'ters that status and you press DISPLAY/CHAR (or DISPLAY)
'or TIME umil you change the format to another (soe the
following sections for d e t a i l s ) . If yo.
cor however, all the di
To change the display in stop mode
Press DISPLAY/CHAR (or DISPLAY) repeatedly to
change the display.
Each press of the button changes the display as follows:
_, Total number of tracks, total recorded time and
disc name!)
i
'The contents of a program (only when "PGM"
lights up)
l
Level of the input signal (setting value of the
recording level)
4
Pitch display
1
DF (digital filter) display
1) "No Name" appears when the dise has no name.
—
Rear panel description
[T] ANALOG IN jacks (11) (14)
Use to input analog signals from other components.
[2] ANALOG OUT jacks (11)
Use to output analog signals to other components.
[3] CONTROL A111 jacks (11) (44)
[8] DIGITAL COAXIAL IN jack (11) (14)
'Connect a digital coaxial cable to input digital signals
from other components
DIGITAL OPTICAL IN connectors (11) (14)
Connect a digital optical cable to input digital signals
from other components. There is no distinction of INI
and IN2 connectors,
[B] DIGITAL COAXIAL OUT jack (11)
'Connect a digital coaxial cable to output digital signals
to other components.
[7] DIGITAL OPTICAL OUT connector (11)
Connect a digital optical cable 10 output digital signals
to other components,
Display window descriptionRear panel description | 9 OF
F |